Vivotek FD8362 Manual do Utilizador

P/N:625014400G Ver.1.0 Copyright 2009 VIVOTEK INC. All rights reserved. cFD8362/62E2 MP • Smart Focus System • Vandal-proof

EN - 9EnglishPower over Ethernet (PoE)POWERCOLLISIONLINKRECEIVEPARTITION12345PoE SwitchWhen using a PoE-enabled switchThe Network Camera is PoE-compli

EN - 10POWERCOLLISIONLINKRECEIVEPARTITION12345When using a non-PoE switchUse a PoE power injector (optional) to connect between the Network Camera and

EN - 11EnglishFor further setup, please refer to the user's manual on the software CD.Ready to Use 60002D10832360002D108323600-02-D1-08-32-36

EN - 121. Install the black cover.2. Attach the dome cover to the camera by combining it to the retainer and aligning with the mounting holes.3. Secur

P/N:625014400G Ver.1.0 Copyright 2009 VIVOTEK INC. All rights reserved. cFD8362/62E2 MP • Smart Focus System • Vandal-proof

EN - 1EnglishPower off the Network Camera as soon as smoke or unusual odors are detected.Contact your distributor in the event of occurrence.Refer to

EN - 2Software CDFD8362/62EQuick Installation Guide / Warranty CardAlignment Sticker / Ceiling Hole Template StickerMounting Plate510000210GPackage C

EN - 3EnglishLight SensorPhysical Description2Inner ViewEthernet 10/100 RJ45 SocketAudio/Video Out (green)Microphone In (pink)General I/O Terminal Blo

EN - 4Outer ViewRecord the MAC address under the camera base before installing the camera.Replace the side opening cover with the included side outlet

EN - 5EnglishFirst, use the included T20 hex key wrench to loose the four screws and detach the dome cover from the camera base. Follow the steps belo

EN - 61. Disassemble the components of the waterproof connector into parts (A) ~ (F) as shown above.2. Place the screw nut (E) on the Power and GPIO

EN - 7English43oOgBbGbrBR12345678o: white/orange stripeO: orange solidg: white/green stripeB: blue solidb: white/blue stripeG: green solidbr: white/br

EN - 8123A4B5Wall mount1. Attach the supplied alignment sticker to the wall.2. Using the circle marks on the sticker, drill at least 2 pilot holes sym